There is no single safe setup that fits every plant. Remote access for machine suppliers should start with an inventory of every existing path. Include tools such as TeamViewer or AnyDesk, and 4G routers left on machines. Then keep the production network apart from office IT. Use one controlled route, with multi-factor authentication and named accounts, not a shared login. Approve, time-limit and log each session. When a person or contract ends, remove that access the same day.
This guide is for small and mid-sized manufacturers in Meath, Cavan, Westmeath, Louth and Dublin. It sets out a practical framework for remote access for machine suppliers and contractors. It does not re-open our guides on legacy production PCs or how to connect a second site.
What remote paths are already on your machines?
First, write down every way someone can reach a machine from outside the building. Ireland’s National Cyber Security Centre asks firms to “Create and maintain an accurate asset inventory”. The same note includes “All external connections, to the Internet or to Vendors or support partners”. Record private links, and backup or support connections, not only the ones you fully control. You can read that in the NCSC note on securing operational technology.
In practice, that list often goes beyond the office firewall. A 4G router on a line can reach the internet on its own. A supplier may have installed a tool years ago and left it running. ENISA tells SMEs they “should regularly review any remote access tools”. See its cybersecurity guide for SMEs. Until that list exists, remote access for machine suppliers is hard to control.
Hypothetical example
A food manufacturer in Kells finds a 4G router on a packing line. The machine supplier left a remote tool running, with one shared password used by several technicians. A contractor finished work six months ago. The login still works, and nobody has a record of who connected.
Keep the production network apart from office IT
Meanwhile, a supplier session should not land on the same network as email and file shares. The NCSC’s advice is direct: “Segment your OT network and isolate it from your corporate network using strong perimeter controls”. In plain terms, machines and their controllers sit behind a firewall. Office laptops, email and browsing stay off that segment. That separation is the foundation for safer remote access for machine suppliers.
In addition, our guide to legacy production PCs explains why old machine PCs should not sit on the office network. The same idea applies when a contractor connects. If office IT already mixes with the production network, fix that first. Otherwise a single session can reach more than the one machine they came to service.
The Data Protection Commission also flags remote access as a weakness. Assess the need first. Its wording is “should be properly assessed”. Then reassess the security measures “before remote access is granted”. That advice sits in its data security guidance. This matters wherever a session could reach personal data, including office systems.
One controlled route for remote access for machine suppliers
After all, one agreed route is easier to watch than several separate supplier tools. The NCSC says multi-factor authentication “is essential for all Remote Access and Admin Access”. Its advice on remote access is to “Mandate the use of strong passwords/passphrases and multi-factor authentication for all remote access”. Give each technician a named account. Do not share one login across a supplier’s team.
Equally, the NCSC describes a “Virtual Private Network (VPN) gateway for remote access to the OT network”. It then points to “a bastion host/jump box to constrain user activity to agreed policies”. In a smaller plant, that still means one controlled hop, not a path onto every controller. Check with your machine supplier how it expects technicians to connect.
Likewise, only open the systems needed for that job. The NCSC says you should “only grant access to specific information/rights required to perform the role”. ENISA says: “Restrict staff remote access only to the systems and computers they need for their work”. The same limit should apply to a contractor. And “Don’t share passwords or other credentials between separate accounts”.
Approve, time-limit and log every session
However, a named account is not enough if it stays open all year. Treat every instance of remote access for machine suppliers as a planned job, not a standing door. A person on your side should approve each session, and switch it off when the work ends. Time limits matter, because an unused login is still a way in. In particular, a 4G link or a supplier tool left running can bypass the route you think you have.
Therefore, keep a record of who connected, when, and to which machine. The NCSC asks firms to “Implement security measures on third party access, including for support partners and vendors”. The point is “control of the access and visibility of activities on your network”. Also collect “relevant security events and logs” from the devices that handle these sessions.
Even so, none of this promises that an incident cannot occur. It does show who was on the network, and for how long. Our guide to manufacturing disaster recovery covers what to do if you lose systems or files. Remote access for machine suppliers should sit beside that plan, not replace it.
When remote access for machine suppliers should end
Finally, access should end when the person or the contract ends. The NCSC says firms should “Review access rights regularly”. If a technician leaves the supplier, ask for written confirmation and remove that account the same day. The same step applies when you do not renew a support contract. A shared login makes this almost impossible.
Good remote access for machine suppliers includes a clear end date, not only a start. Put the practical points in the support agreement as well. Name who may connect, the route they use, and the need for multi-factor authentication. State that you approve, time-limit and log sessions, and that access ends when a person or contract changes. Ask your solicitor to review the wording. This is a working list, not legal advice.
Within our managed IT support packages, we can review remote access for machine suppliers. Then we can map those paths and plan a controlled route. Silver is €49, Gold is €69 and Diamond is €89 per user per month, excl. VAT. Microsoft 365 licences are billed separately. Gold includes email security, phishing awareness training and unlimited on-site call-outs. The helpdesk runs Monday to Friday, 9am to 5:30pm. After-hours emergency support is at extra cost. Firewalls, segmentation and a controlled remote path can be scoped in a written proposal. Our page on managed IT support cost explains how backup and networking sit in a package. For the wider production picture, see our IT support for manufacturers page.
A quick sense-check
Need a clearer picture of remote access for machine suppliers?
Book a short call with Michael Sweeney to review remote paths, and how you would approve and log a session.


